LED Digit Display Kit: Classification of LED Digit Displays

Time:

2022-07-12 11:04

Author:

Web scraping

LED Digit Display Kit: Classification of LED Digit Displays

The manufacturer of seven-segment displays states that these displays, also known as light‑emitting tubes, are electronic devices capable of showing digits and other information. The glass tube comprises an anode made of a metal mesh and multiple cathodes. In most seven-segment displays, the cathodes are shaped like numerals. The tube is filled with low‑pressure gas—typically neon, often mixed with small amounts of mercury and/or argon. When a particular cathode is energized, the display emits colored light; depending on the gas inside, the color is usually orange or green.

　　 Digital tube kit The manufacturer states that a digital tube, also known as a light‑emitting tube, is an electronic device capable of displaying digits and other information. The glass envelope contains an anode made of a metal mesh and multiple cathodes. In most digital tubes, the cathodes are shaped like numerals. The tube is filled with low‑pressure gas—typically neon, often mixed with small amounts of mercury and/or argon. When a particular cathode is energized, the tube emits colored light; depending on the gas inside, the color is usually orange or green.

　　Although it resembles a vacuum tube in appearance, its operating principle does not involve heating a cathode to emit electrons. Consequently, it is referred to as a cold-cathode tube or a variant of the neon lamp. At room temperature, even under extreme indoor operating conditions, the temperature of such a tube rarely exceeds 40°C.

　　Digital tube kit manufacturers note that the most common type of digital tube has ten cathodes, with shapes corresponding to the digits 0 through 9. Some digital tubes also feature one or two decimal points. However, other types of digital tubes can display letters, symbols, and marks. For example, certain “digital tubes” use a template‑made mask with holes for the digits. In some foreign models, such as the IN‑14, an inverted “2” is used to represent the digit “5,” likely to cut production costs rather than for any obvious technical or aesthetic reason. In Russian‑made digital tubes, too, an inverted “2” often stands in for “5.”

　　When a 170-volt DC voltage is applied between the cathode and anode, each cathode emits a neon red‑orange light. Different types of Nixie tubes exhibit varying colors due to differences in their gas mixtures. Nixie tubes have a longer lifespan; mercury is added during manufacturing to reduce sputtering. As a result, the emitted light appears blue or violet. In some cases, these colors are filtered by a red or orange coating on the glass.

　　The manufacturer of LED digit displays states that these displays are also referred to as LED digital tubes. People in different industries may use different terms, but they all refer to the same product.

　　Digital tube kit manufacturer’s introduction: Based on the connection method of the LED elements, digital tubes can be classified into common-anode and common-cathode types. In a common-anode digital tube, all the anodes of the LEDs are connected together to form a common anode (COM). During operation, the common anode (COM) should be connected to +5 V. When the cathode of a particular segment is at a low level, that segment lights up; when the cathode is at a high level, the segment remains off. In contrast, a common-cathode digital tube has all the cathodes of the LEDs connected together, forming a common cathode (COM). In this configuration, the common cathode (COM) should be tied to ground (GND). When the anode of a specific segment is at a high level, that segment illuminates; when the anode is at a low level, the segment stays off.

LED Digit Kit: How to Use an LED Digit?

LED Digit Kit: What is an LED digit?